Jensen BT360 - Manual (Page 8)

Connecting Components
The following illustration shows where to connect the devices. Do
not connect the components until you have followed the next steps
and have finalized your installation.
ÒCONNECT THE POWER HARNESS LAST.
Junction box
Speaker
Microphone
Control Module
Control Module The control module should be located
within reach and view of the driver.
Speaker
For best reception, the speaker should
be mounted at least 80 cm (30 inches)
from the Car Kit’s microphone.
Microphone Ideally, the microphone should be
located in front of the user and above
waist height.
4