Jensen BT360 - Manual (Page 18)

Note 1: The display will not show Incoming Call 2 during the call, but
you will hear a waiting tone so you remember there is another call
waiting.
Note 2: To transfer a privacy call from your phone to the BT360
follow the instructions provided with your phone.
Setting the FM Transmitter Mode for A2DP
a. Press the Play/Pause key for 3 seconds to enter the FM mode.
The control will display “FM MODE”
14
Eg:
M1 88.1
FM MODE
b. Find a radio station on your car stereo that does not already
have anything playing on it. This will be the station you will set
the BT360 to transmit the A2DP Music on so you can hear it on
your stereo.
c. To adjust the FM transmit frequency: Hold the Play/Pause key
for another 3 seconds, and then adjust to the same FM channel
that you selected on your radio. By pressing the forward and
backward key, and then press the End key to confirm the
setting.