JVC RX-7000RBK - Manual (Page 30)

27
English
Available DSP Modes According to the Speaker Arrangement
Available DSP modes will vary depending on how many speakers are used with this receiver.
Make sure that you have set the speaker information correctly (see page 14).
Available DSP modes
Each time you press DSP MODE on the front panel or SURROUND MODE on
the remote control, the DSP modes change as follows:
Speaker arrangements
Front
speaker
TV Front
speaker
• 3D THEATER
• LIVE CLUB
• DANCE CLUB
• HALL
• PAVILION
• 3D ACTION
• DSP OFF (DSP mode is canceled)
TV
Center speaker
Front
speaker
Front
speaker
Rear
speaker
Rear
speaker
Front
speaker
TV Front
speaker
Rear
speaker
Rear
speaker
Front
speaker
TV
Center speaker
Front
speaker
Each time you press DSP MODE on the front panel or SURROUND MODE on
the remote control, the DSP modes change as follows:
By pressing DSP MODE:
• THEATER
• LIVE CLUB
• DANCE CLUB
• HALL
• PAVILION
• 3D ACTION
• DSP OFF (DSP mode is canceled)
To activate the Surround
mode,
press SURROUND ON/
OFF button so that the lamp on
the button lights up.
To activate the Surround
mode,
you can also use the
SURROUND ON/OFF button.
By pressing SURROUND MODE:
• DOLBY/DTS/MPEG SURROUND
(DOLBY PRO LOGIC, DOLBY
DIGITAL*, DTS SURROUND**, or
MPEG SURROUND***)
• THEATER
• LIVE CLUB
• DANCE CLUB
• HALL
• PAVILION
• 3D ACTION
• DSP OFF (DSP mode is canceled)
* Activated automatically only when “AUTO/PCM” is selected as the digital input
and playback source is encoded with Dolby Digital.
** Activated automatically only when “AUTO/PCM” is selected as the digital input
and playback source is encoded with DTS Digital Surround.
Notes:
• If Surround mode is canceled while playing back a multichannel source such as
Dolby Digital, DTS Digital Surround and MPEG Multichannel, all channel
signals are mixed with left and right front channels and are output through the
front speakers.
• While playing back a multichannel source such as Dolby Digital, DTS Digital
Surround and MPEG Multichannel, Theater Surround, DAP modes, and 3D-
PHONIC modes cannot be used. On the other hands, if you select a Dolby
Digital, DTS Digital Surround and MPEG Multichannel as the source to play
while using any of Theater Surround, DAP modes, and 3D-PHONIC modes, the
currently selected mode will be canceled and Dolby Digital, DTS Digital
Surround or MPEG multichannel mode will be activated.
*** Activated automatically only when “AUTO/PCM” is selected as the digital input
and playback source is encoded with MPEG Multichannel.
EN24_33.RX-7000R[E]/f 00.4.24, 6:00 PM 27