JVC RX-7000RBK - Manual (Page 35)

32
English
For the other DSP modes
On the front panel:
1. Press DSP MODE repeatedly until
the mode you want appears on the
display.
• Each time you press the button, the DSP
modes change. (See page 27 for more
details.)
2. Select and play a sound source.
• To enjoy 3D-PHONIC and JVC Theater Surround, play back a
software encoded with Dolby Surround and labeled with
DOLBY SURROUND mark.
To cancel the DSP mode
Press DSP MODE repeatedly until “DSP OFF”
appears on the display.
From the remote control:
1. Press SURROUND MODE
repeatedly until the DSP mode you
want appears on the display.
• Each time you press the button, the DSP
modes change.
2. Select and play a sound source.
• To enjoy 3D-PHONIC and JVC Theater Surround, play back a
software encoded with Dolby Surround and labeled with
DOLBY SURROUND mark.
To cancel the DSP mode
Press SURROUND MODE repeatedly until
“DSP OFF” appears on the display.
Note:
While playing back MPEG Multichannel or Dolby Digital source
through a digital input terminal, you can neither select nor adjust any
DSP mode. If any DSP mode is in use, it is temporarily canceled, and
normal stereo sounds are reproduced.
To enjoy the MPEG Multichannel and Dolby Digital source with DSP
mode, change the input mode from the digital input to the analog input
(see page 16.)
DSP MODE
––––––––––––––– MEMO –––––––––––––––
Use this column to write down your DSP mode adjustments for
your future reference.
DSP MODE
SURROUND
MODE
SURROUND
MODE
EN24_33.RX-7000R[E]/f 00.4.24, 3:02 PM 32