JVC RX-7000RBK - Manual (Page 39)

36
English
6. Press
% / fi to move
to the item you want to
set or adjust, then press
@ / #.
On this adjustment menu, you can do the following:
“CENTER LEVEL”: Adjust the center speaker output level.
“REAR L LEVEL”: Adjust the left rear speaker output
level.
“REAR R LEVEL”: Adjust the right rear speaker output
level.
7. When you finish, press EXIT repeatedly until the
menu disappears from the TV.
Selecting Your Favorite SEA Mode
(Also see page 24)
1. Press MENU.
The MAIN MENU appears on the TV.
• Pressing one of the
% / fi / @ / # buttons also displays the
MAIN MENU.
2. Press
% / fi to move
to “SOUND
CONTROL,” then press
@ / #.
The SOUND CONTROL menu appears.
3. Press
% / fi to move
to “SEA,” then press
@ / #.
The SEA menu appears.
4. Press % / fi to move
to “SEA MODE.”
5. Press
@ / # to select the SEA mode you want.
6. When you finish, press EXIT repeatedly until the
menu disappears from the TV.
Creating Your Own SEA Mode
(Also see page 24)
1. Press MENU.
The MAIN MENU appears on the TV.
• Pressing one of the
% / fi / @ / # buttons also displays the
MAIN MENU.
2. Press
% / fi to move
to “SOUND
CONTROL,” then press
@ / #.
The SOUND CONTROL menu appears.
3. Press
% / fi to move
to “SEA,” then press
@ / #.
The SEA menu appears.
For DAP (LIVE CLUB, DANCE CLUB, HALL, PAVILION) :
“REAR L LEVEL”: Adjust the left rear speaker output
level.*
“REAR R LEVEL”: Adjust the right rear speaker output
level.*
“DSP EFFECT”: Select the effect level.
For Dolby Pro Logic:
“TEST TONE”: Output a test tone.
“CENTER LEVEL”: Adjust the center speaker output
level.**
“REAR L LEVEL”: Adjust the left rear speaker output
level.*
“REAR R LEVEL”: Adjust the right rear speaker output
level.*
For Dolby Digital, DTS Digital Surround and MPEG
Multichannel:
“TEST TONE”: Output a test tone.
“CENTER LEVEL”: Adjust the center speaker output
level.**
“REAR L LEVEL”: Adjust the left rear speaker output
level.*
“REAR R LEVEL”: Adjust the right rear speaker output
level.*
For JVC Theater Surround:
“TEST TONE”: Output a test tone.
“CENTER LEVEL”: Adjust the center speaker output
level.**
“REAR L LEVEL”: Adjust the left rear speaker output
level.*
“REAR R LEVEL”: Adjust the right rear speaker output
level.*
“DSP EFFECT”: Select the effect level.
Notes:
* Not displayed when “REAR SPK” is set to “NONE” (see page
14).
** Not displayed when “CENTER SPK” is set to “NONE” (see
page 14).
7. When you finish, press EXIT repeatedly until the
menu disappears from the TV.
Activating the DVD MULTI Playback Mode
(Also see page 33)
1. Press MENU.
The MAIN MENU appears on the TV.
• Pressing one of the
% / fi / @ / # buttons also displays the
MAIN MENU.
2. Press
% / fi to move
to “SOURCE.”
3. Press
@ / # to select “DVD MULTI.”
4. Press
% / fi to move
to “SOUND
CONTROL,” then press
@ / #.
The SOUND CONTROL menu appears.
5. Press
% / fi to move
to “SURROUND
LEVEL,” then press
@ / #.
The SURROUND LEVEL
menu appears.
SURROUND LEVEL
:OPERATE
CENTER LEVEL: 0dB
REAR L LEVEL: +6dB
REAR R LEVEL: 4dB
SEA
SEA MODE :ROCK
SEA ADJUST
:OPERATE
100 10kHz 1k
EN34_44.RX-7000R[E]/f 00.4.24, 3:04 PM 36