JVC RX-7000RBK - Manual (Page 37)

34
English
Selecting the Source to Play (Also see page 10)
1. Press MENU.
The MAIN MENU appears on the TV.
• Pressing one of the
% / fi / @ / # buttons also displays the
MAIN MENU.
Notes:
• “INPUT” appears only when the digital input (DIGITAL IN)
terminal setting has been correctly done for the digital source
currently selected. (See page 16.)
• If your TV is not of the PAL-or multi-color system, the TV screen
will be distorted.
• The on-screen display will disappear if no operation is done for
about 1 minute.
2. Press
% / fi to move
to “SOURCE.”
3. Press
@ / # to select the source.
4. When you finish, press EXIT.
The menu disappears from the TV.
Using the On-Screen Menus
You can use the Menus on the TV screen to control the receiver.
To use this function, you need to connect the TV to the MONITOR OUT jack on the rear panel (see page 7), and set the
TV’s input mode to the proper position to which the receiver is connected.
•
When the TV’s input mode is incorrect; for example, a different video input or TV tuner mode is selected, you
cannot show the Menus on the TV screen.
On-Screen Operation buttons (on the remote control)
Selecting Different Sources for Picture and
Sound
(Also see page 11)
1. Press MENU.
The MAIN MENU appears on the TV.
• Pressing one of the
% / fi / @ / # buttons also displays the
MAIN MENU.
2. Press % / fi to move
to “VISUAL.”
3. Press @ / # to select a
different video source.
4. When you finish, press EXIT.
The menu disappears from the TV.
Activating the DSP Modes (Also see page 31)
1. Press MENU.
The MAIN MENU appears on the TV.
• Pressing one of the
% / fi / @ / # buttons also displays the
MAIN MENU.
2. Press
% / fi to move
to “MODE.”
3. Press @ / # to select the
DSP mode you want to
use.
4. When you finish, press EXIT.
The menu disappears from the TV.
Selecting the Analog or Digital Input Mode
(Also see page 16)
This selection is only possible when the digital input (DIGITAL IN)
terminal setting has been correctly done for the digital source
currently selected.
1. Press MENU.
The MAIN MENU appears on the TV.
• Pressing one of the
% / fi / @ / # buttons also displays the
MAIN MENU.
2. Press
% / fi to move
to “INPUT.”
3. Press
@ / # to select the
digital or analog input
you want.
For details, see page 16.
4. When you finish, press EXIT.
The menu disappears from the TV.
MAIN MENU
SOURCE :CD
VISUAL :VCR
MODE :OFF
INPUT :ANALOG
SOUND CONTROL
TUNER CONTROL
SETTING
VOLUME : 20
:OPERATE
Shows the buttons you
can use on the current
menu.
In this case, use
% / fi to
move up and down,
and @ / # to select,
adjust or set the item.
MAIN MENU
SOURCE :PHONO
VISUAL :VCR
MODE :OFF
SOUND CONTROL
TUNER CONTROL
SETTING
VOLUME : 20
:OPERATE
MAIN MENU
SOURCE :CD
VISUAL :VCR
MODE :OFF
INPUT :ANALOG
SOUND CONTROL
TUNER CONTROL
SETTING
VOLUME : 20
:OPERATE
RM-SRX7000R REMOTE CONTROL
CONTROL
CHANNEL VOLUME TV VOL
PTY SEARCH
DISPLAY MODE
STOP PAUSE
FF/ /REW
VCR TV/VIDEO TAPE/MD MUTING
REC
PLAY
PTY PTY
TV/CATV/DBS VCR
DVD DVD MUILTI CD TAPE/MD
TV/DBS PHONO FM/AM
VCR ANALOG/DIGITAL
SURROUND CENTER
SURROUND TEST REAR-L
CD-DISC
MODE
ON/OFF
EFFECT REAR-R
SOUND SEA MODE SUBWOOFER
RETURN
SET
MENU
AUDIO/
TV/VCR
EXIT TEXT DISPLAY
FM MODE
SLEEP
1 2 3
4 5 6
7 /P 8 9
10 0 +10
100+
CATV/DBS
MENU
ENTER
SET
MENU
EXIT
MAIN MENU
SOURCE :VCR
VISUAL :VCR
MODE :PRO LOGIC
SOUND CONTROL
TUNER CONTROL
SETTING
VOLUME : 20
:OPERATE
EN34_44.RX-7000R[E]/f 00.4.24, 3:03 PM 34