Connecting other equipment, English, Press and hold demo for more than 2 seconds – JVC CA-MXJ206 User Manual

Page 13: Right left, Audio equipment

Advertising
background image

– 10 –

English

AUX

IN

RIGHT

LEFT

SPEAKERS

RIGHT

LEFT

ANTENNA

FM

AM LOOP

FM
75

GND

GND

AM
EXT

CAUTION:
SPEAKER IMPEDANCE
6

~

16 OHMS

Connecting Other Equipment

You can connect an audio equipment — used only as a
playback device.
When you connect and use this equipment, refer also to its
manual.

Be sure that the plugs of the audio cords are color coded:
White plugs and jacks are for left audio signals, and red ones
for right audio signals.

• DO NOT connect any equipment while the power

is on.

• DO NOT plug in any equipment until all

connections are complete.

To connect audio equipment

Connect the audio output jacks on the other equipment and
the AUX IN jacks on the rear, using an audio cord (not
supplied).

To audio output

NOW, you can plug in the unit and other
connected equipment FINALLY!

To a wall outlet

When connecting the AC power cord into a wall outlet, the
unit automatically starts display demonstration.

To stop the display demonstration, press any button on the
unit or the remote control.

To start the display demonstration manually

Press and hold DEMO for more than 2
seconds.

To stop the demonstration, press any button.

Audio equipment

AUX

IN

RIGHT

LEFT

SPEAKERS

RIGHT

LEFT

ANTENNA

FM

AM LOOP

FM
75

GND

GND

AM
EXT

CAUTION:
SPEAKER IMPEDANCE
6

~

16 OHMS

DEMO

CANCEL

MX-J300/206/200[C] 01-14 EN

00.4.10, 2:10 PM

10

Advertising