JVC CA-MXJ206 - Manual (Page 19)

– 16 –
English
To locate a particular point in a track
During play, press and hold 4 or ¢.
• 4 : Fast reverses the disc.
•
¢ : Fast forwards the disc.
To go to another track
Press
4 or ¢ repeatedly before or during
playback.
•
4: Goes back to the beginning of the
current or previous tracks.
•
¢: Skips to the beginning of the next or
succeeding tracks.
If you press and hold 4 / ¢ before playing
You can change the tracks continuously.
To go to another track directly using the number
buttons
Pressing the number button(s) before or during play allows
you to start playing the track number you want.
When a track number button is pressed, CD play starts from
the track of the currently selected disc.
Ex.: For track number 5, press 5.
For track number 15, press +10 then 5.
For track number 20, press +10, then 10.
For track number 32, press +10 , +10, +10, then 2.
Programming the Playing Order of the Tracks
— Program Play
You can arrange the order in which the tracks play before you
start playing. You can program up to 32 tracks.
• To use Repeat play for Program play, press REPEAT after
starting Program play.
1
Load discs.
• If the current playing source is not the CD player, press
CD
6, then 7 on the unit (or CD 7/CLEAR on the
remote control) before going to the next step.
2
Select the Program play mode.
On the unit:
Press PROGRAM.
On the remote control:
Press PLAY MODE repeatedly until the
PRGM indicator lights on the display. Each
time you press the button, the CD play
mode changes as follows:
Program play = Ramdom play = Continuous play
= (back to the beginning)
• If a program has been stored in memory, the program is
called up.
3
Press one of the disc number
buttons (CD 1, CD 2, and CD 3)
to select the disc number you
want to play.
4
Select a track from the CD selected in the
above step.
On the unit:
Press
4 or ¢ to select the track number,
then press SET.
On the remote control:
Press the number buttons.
• For how to use the number
buttons, see “To go to another
track directly using the number
buttons” described to the left.
5
Program other tracks you want.
• To program tracks from the same disc, repeat step 4.
• To program tracks from a different disc, repeat steps 3
and 4.
6
Press CD
6.
The tracks are played in the order you have programed.
– PRESET +
– PRESET +
1 2 3
4 5 6
7 8 9
10 + 10
PLAY MODE
CD 1
CD 2
CD 3
Disc number
Track number
SET
ST
REC SOUND MODE
2 3 1 BASS
PRGM
ST
REC SOUND MODE
2 3 1 BASS
PRGM
– PRESET +
1 2 3
4 5 6
7 8 9
10 + 10
Continued
PROGRAM
Program step number
ST
REC SOUND MODE
2 3 1 BASS
PRGM
MX-J300/206/200[C]15-19 EN 00.4.10, 2:11 PM 16