JVC CA-MXJ206 - Manual (Page 25)

– 22 –
English
Using the Timers
– PRESET +
– PRESET +
– PRESET +
SET
SET
DAILY
Canceled
ON TIME
ON TIME Clock
setting
(See page 11.)
REC
CLOCK/TIMER
CLOCK/TIMER
– CD – – –
TUNER FM TUNER AM
TAPE AUX
There are three timers available — Recording Timer, Daily
Timer, and Sleep Timer.
Before using the timers, you need to set the clock built in the
unit. (See page 11.)
Using Daily Timer
With Daily Timer, you can wake to your favorite music or
radio program.
How Daily Timer actually works
The unit automatically turns on, set the volume level to the
preset level, and starts playing the specified source when the
on-time comes (the
indicator flashes just before the on-
time, and continues flashing while the timer is operating).
Then, when the off-time comes (“OFF” flashes just before the
off-time), the unit automatically turns off (stands by).
The timer setting remains in memory until you change it.
• There is a time limit in doing the following steps. If the
setting is canceled before you finish, start from step 1
again.
• If you have made a mistake while setting timer, press
CANCEL. (However, this does not always work. If
CANCEL does not work, press CLOCK/TIMER repeatedly
and start from step 1 again.)
On the unit:
1
Press CLOCK/TIMER until
“DAILY” appears on the display.
The DAILY indicator also starts flashing on the display.
• Each time you press the button, the timer setting mode
changes as follows:
2
Press CLOCK/TIMER again.
“ON TIME” appears for 2 seconds, then the
unit enters on-time setting mode.
3
Set the on-time you want the unit
to turn on.
1) Press 4 or ¢ to set the hour, then
press SET.
2) Press
4 or ¢ to set the minute, then
press SET.
“OFF TIME” appears for 2 seconds, then
the unit enters off-time setting mode.
4
Set the off-time you want the unit
to turn off (on standby).
1) Press
4 or ¢ to set the hour, then
press SET.
2) Press
4 or ¢ to set the minute, then
press SET.
The unit enters source selecting mode.
5
Press
4 or ¢ to select the
source to play, then press SET.
• Each time you press
4 or ¢, the
source changes as follows:
TUNER FM : tunes into a specified preset FM
station.
= go to step 6.
TUNER AM : tunes into a specified preset AM station. =
go to step 6.
– CD – – – : plays a disc from a specified track of a
specified disc.
= go to step 6.
• Make sure there is a CD on the selected disc
number tray.
TAPE : plays a tape in deck A or B.
= go to step 7.
• Make sure that a tape is in the deck whose deck
indicator (A or B) is lit on the display.
• Make sure that the tape direction is correct.
AUX : plays an external source.
= go to step 7.
• To use this setting, the external component has to
be equipped with the timer function.
SET
DAILY
ST
REC SOUND MODE
BASS
DAILY
ST
REC SOUND MODE
BASS
DAILY
ST
REC SOUND MODE
BASS
DAILY
ST
REC SOUND MODE
BASS
Continued
MX-J300/206/200[C] 20-28 EN 00.4.10, 2:10 PM 22