JVC CA-MXJ206 - Manual (Page 20)

– 17 –
English
To stop during play, press 7 on the unit (or CD 7/CLEAR
on the remote control).
To exit from program play mode
On the unit:
Press PROGRAM again before or after play so that the unit
enters Continuous play mode.
On the remote control:
Press PLAY MODE repeatedly until all the CD play mode
indicator go off from the display.
• The program you have made is stored in memory until you
erase the program.
To check the program contents
Before playing, you can check the program contents by
pressing
4 or ¢ on the remote control.
•
¢ : Shows the programed tracks in the programed order.
•
4: Shows them in the reverse order.
To modify the program
Before play, you can erase the programed tracks
shown on the display by pressing CANCEL.
• Each time you press the button, the programed
track shown on the display is erased from the
program.
To add tracks in the program before play, simply select the
disc numbers and the track numbers you want to add by
following steps 3 and 4 of the programming procedure on
page 16.
To erase the entire program before or after play, press 7
on the unit (or CD
7/CLEAR on the remote control).
“PROGRAM” appears on the display.
• Ejecting a CD will also erase the track numbers programed
from the ejected CD.
If you try to program a 33rd step
“FULL” will appear on the display.
If your entry is ignored
You have tried to program a track from an empty tray, or a track
number that does not exist on the CD (for example, selecting track
14 on a CD that only has 12 tracks). Such entries are ignored.
ST
REC SOUND MODE
2 3 1 BASS
RANDOM
RANDOM
C D
PLAY MODE
Playing at Random — Random Play
The tracks of all loaded CDs will play at random.
• To use Repeat play for Random play, press REPEAT after
starting Random play.
1
Prepare CDs.
• If the current playing source is not the CD player, press
CD
6, then 7 on the unit (or CD 7/CLEAR on the
remote control) before going to the next step.
2
Select the Random play mode.
On the unit:
Press RANDOM.
On the remote control:
Press PLAY MODE repeatedly until the
RANDOM indicator lights on the display.
Each time you press the button, the CD play
mode changes as follows:
Program play
= Random play = Continuous play
= (back to the beginning)
3
Press CD
6.
The tracks are played at random.
Random play ends when all the tracks are
played once.
To stop during play, press
7 on the unit (or CD 7/CLEAR
on the remote control).
• Random play also stops when one of the disc trays is
opened.
To exit from Random play mode, press RANDOM again
before or after play so that the unit enters Continuous play
mode.
Even if you press 4
You cannot go back to the previous tracks during Random play.
• If you press
¢, you can go to next random tracks.
CANCEL
DEMO
MX-J300/206/200[C]15-19 EN 00.4.10, 2:11 PM 17