JVC CA-UXQD9S - Manual (Page 109)

48
Con
ven
ient Fu
nctions
En
glis
h
Convenient Functions
In step 2 on page 47, select the timer number you
want to cancel, and then press
.
Even when you cancel the recording timer, the set-
ting remains stored.
In step 2 on page 47, select the timer number you
want to activate, and then press repeatedly
until all of the setting procedure finishes. Then turn
off the main unit.
NOTE
• When you want to activate two or three recording
timers, leave a blank time of 2 or more minutes
between the ending time of the first recording timer
and the starting time of the second recording timer.
If the blank time is less than 2 minutes, the second
recording timer does not work.
• When the power plug is disconnected or the
power is cut, the recording timer settings may be
lost. If the settings are lost, set the clock and
recording timer again.
1
Prepare the sound source you
want to play back.
2
Press repeatedly to select
"TIMER1", "TIMER2" or "TIMER3".
Example: When "TIMER2" is selected
3
Press .
4
Press , or to set the
starting time and ending time.
Example: When you want to set the playback
time from 7:00 a.m. to 7:30 a.m.
• You can use the number buttons to set the
playback time. Refer to "Using the number
buttons" (
page 16).
• For setting the clock, refer to "Setting the
Clock" ( page 16).
Entering the "hour" → → Entering the
"minute" →
5
Press or to select
"ONCE" or "EVERYDAY".
ONCE : The playback timer works once.
EVERYDAY : The playback timer works every
day.
6
Press .
7
Press or to select
"PLAY TIMER".
(Continued on next page)
For the locations of remote control
buttons, refer to page 46.
Canceling the recording timer
Activating the recording timer again
Playback Timer
Disc Make sure that a disc is loaded.
(
page 21)
Cassette
tape
Insert a cassette tape. ( page 42)
Radio Preset the radio station whose broadcast
you want to listen to. (
page 20)
Other
equipment
Follow the operation manual for the
equipment.
Timer number
UX-QD9[US].book 48 ページ ２００４年１０月８日 金曜日 午前１０時２７分