JVC CA-UXQD9S - Manual (Page 140)

Introduction
21
Listening to Discs
Basic Operations of the DVD Player
NOTE
• Set the remote control mode selector to
AUDIO before using the number buttons.
(Refer to page 36 for playing back MP3/WMA and
JPEG.)
1
Press on the main unit.
• The disc tray comes out.
2
Place a disc on the disc tray.
• When you want to listen to an 8 cm disc,
place it on the inner hollow of the disc tray.
3
Press .
■Display for DVD VIDEO
Display while a DVD VIDEO is being played
back:
Display while the DVD VIDEO is stopped:
How to read this manual
• Operations are described by mainly using the
remote control buttons. If there are the same
marks on the main unit, the buttons on the main
unit can also be used.
• The following marks tell you for which type of the
discs the operation can be made.
• The illustrations and TV screens may be different
between the actual case and the description.
• "VCD" stands for "Video CD".
• "SVCD" stands for "Super Video CD".
Number buttons
Remote control
mode selector
Playback
Letter-printed surface
Disc tray
Elapsed playing time
Title number
Chapter number
DVD indicator
(The DVD indicator lights up while the DVD VIDEO is
stopped. The DVD indicator flashes while the DVD
VIDEO is being played back or paused.)
Total number of titles
UX-QD9[UN].book 21 ページ ２００４年９月２８日 火曜日 午前１０時５４分