JVC CA-UXQD9S - Manual (Page 154)

Introduction
35
(Continued)
Status Bar and Menu Bar
■While a disc is being played back
1
Press twice.
• The menu bar ( page 34) appears.
2
Press to select .
3
Press .
4
Press to select
.
5
Press at the starting point of
the part to be repeated (designat-
ing A point).
• The icon on the menu bar will be .
6
Press at the end of the part to
be repeated (designating B point).
• The icon on the menu bar will be .
" A-B" appears in the display window on
the main unit and the part between A and B
points is played back repeatedly.
• To cancel A-B repeat playback:
• Press .
• Select and press twice.
(Select .)
NOTE
• You can operate a VCD and SVCD while the disc is
played back with PBC off.
• A-B repeat playback is possible only within the
same title or track. A-B repeat playback cannot
be carried out during PBC playback, program
playback, random playback and repeat playback.
■While a disc is being played back
1
Set the remote control mode
selector to AUDIO.
2
Press twice.
• The menu bar appears ( page 34).
3
Press to select .
4
Press .
5
Enter the time using the number
buttons ( - , ).
Example: When you want to play back a
disc from the position of (0 hour)
23 minutes 45 seconds, press
the buttons in the order:
• You can skip entering "minutes" and
"seconds".
• If you enter wrong numbers, press to
delete the numbers, and then enter the
numbers again.
6
Press .
• To delete the menu bar, press .
NOTE
• You may not be able to operate this function
depending on the disc.
• This function does not work during program play-
back or random playback.
• For a CD, this operation can always be carried
out. For a VCD or SVCD, the operation can be
carried out when the disc is stopped or during
playback without the PBC function.
• Time search for a DVD VIDEO is from the
beginning of the title, for a DVD AUDIO is from
the beginning of the track being played back.
Time search for a VCD, SVCD and a CD is as
follows:
• When the disc is stopped, time search is from
the beginning of the disc.
• When the disc is being played back, time search
is within the track currently being played back.
For the locations of remote control
buttons, refer to page 34.
Playing Back the Designated
Part Repeatedly
(A-B Repeat Playback)
OFF A B
Canceling A-B repeat playback
Designate the Time
(Time Search)
UX-QD9[UN].book 35 ページ ２００４年９月２８日 火曜日 午前１０時５４分