When a clearer picture is desired, Connecting the power plug, Connecting by using the s-video cord – JVC CA-UXQD9S User Manual
Page 18: Connecting by using the component video cord, Demonstration display function
Introduction
15
(Continued)
Connections
You can enjoy pictures of better quality using the
following cord instead of the supplied video cord.
You can enjoy better quality pictures than when
using the S-video cord.
CAUTION
• Use one of either the S-video cord or the
component video cord. If both cords are used,
pictures may not be played back properly.
NOTE
• In order to enjoy pictures with the progressive
mode (
page 29), the TV is required to have
progressive video input.
• If the component video input jacks of your TV are
BNC type, use a plug adapter (not supplied) to
convert the plugs.
• After making all other necessary connections,
connect in the power plug.
NOTE
• The preset setting such as preset channels and
sound adjustment may be erased in a few days in
the following cases:
- When you disconnect the power plug.
- When a power failure occurs.
When you connect the power plug into the AC
outlet, "DEMO START!" appears in the display
window and the demonstration display starts.
When you press
on the main unit, "DEMO
OFF" appears in the display window and the
demonstration display is canceled.
Turning on the main unit automatically cancels the
demonstration display.
Resuming the demonstration display
With the power turned off, press
on the main
unit.
Connect all necessary parts before connecting the power plug.
When a Clearer Picture Is
Desired
Connecting by using the S-video cord
TV
Main unit
S-video cord
(not supplied)
S-VIDEO
Connect the ends of S-video cord making
sure that each end matches its compatible
terminal.
Connecting by using the component
video cord
TV
Main unit
Component video cord
(not supplied)
Connecting the Power Plug
AC outlet
Main unit (rear view)
Demonstration display function
Hiding the demonstration display
With the power turned off, hold down
until "DEMO CLEAR" appears.
Disconnecting and then reconnecting the
power plug does not start the demonstration
display.
To activate the demonstration display again,
hold down
until "DEMO START!"
appears.
UX-QD9[A]-03.fm 15 ページ ２００４年９月２２日 水曜日 午前１１時４分