JVC CA-UXQD9S - Manual (Page 168)

Introduction
49
(Continued)
Using the Timers
8
Press .
9
Press or to select the
sound source you want to play back.
Example: When you want to listen to an AM
broadcast
• When you want to listen to sound from other
equipment, you cannot use the playback
timer function to start playback on any
equipment other than this product.
• You cannot use the playback timer function
together with program playback, repeat
playback or random playback of a disc.
■When you want to listen to an FM/AM radio
broadcast
• (With "FM" or "AM" selected) Press ,
and then press , or the num-
ber buttons to select the preset number
of the radio station whose broadcast you
want to listen to (
page 20). Refer to
"Using the number buttons"
(
page 16).
■When you want to play back a DVD VIDEO
or DVD AUDIO
• (With "DVD/CD" selected) Press
twice. Regardless of the displayed num-
bers of group (G) and track (T), you can
play back a DVD VIDEO or DVD AUDIO
only from the beginning of the disc.
■When you want to play back a CD, VCD or
SVCD
• (With "DVD/CD" selected) Press
twice, and then press , or the
number buttons to select the number of a
track (T) from which you want to start
playback. Refer to "Using the number
buttons" (
page 16). The group
number (G) is ignored.
■When you want to specify a track from
which you want to start playback on an MP3
or WMA
• (With "DVD/CD" selected) Press ,
press , or the number buttons
to select the group number (G) to be
played back, press
, and then press
, or the number buttons to
select the track number (T) to be played
back. Refer to "Using the number
buttons" (
page 16).
10
Press .
11
Press or to adjust the
playback volume.
12
Press .
• The settings appear in the display window.
13
When the main unit is turned on,
press to turn off the main
unit.
• The playback timer is available only when
the main unit is turned off.
NOTE
• During operation, you can return to the previous
step by pressing . You can quit the playback
timer settings by pressing . The settings are
not stored.
• When the playback timer starts, the volume
gradually increases to the selected level.
In step 2 on page 48, select the timer number you
want to cancel, and then press
.
Even when you cancel the playback timer, the set-
ting remains stored.
In step 2 on page 48, select the timer number you
want to activate, and then press
repeatedly
until all of the setting procedure finishes. Then turn
off the main unit.
NOTE
• When you want to activate two or three playback
timers, leave a blank time of 2 or more minutes
between the ending time of the first playback timer
and the starting time of the second playback timer.
If the blank time is less than 2 minutes, the second
playback timer does not work.
• When the power plug is disconnected or the
power is cut, the playback timer settings may be
lost. If the settings are lost, set the clock and
playback timer again.
• When you operate the playback timer with a DVD
VIDEO, DVD AUDIO or VCD, sound and video
may not be played back automatically. A DVD
VIDEO, DVD AUDIO or VCD may contain a disc
menu that appears first when played back.
Sound or video will not come out before you
select the desired item to be played back on the
disc menu.
For the locations of remote control
buttons, refer to page 46.
Canceling the playback timer
function
Activating the playback timer again
UX-QD9[UN].book 49 ページ ２００４年９月２８日 火曜日 午前１０時５４分