John Lewis JLBIDO911 - Manual (Page 22)

Main oven defrost
This function defrosts most foods faster than
more conventional methods.
It is particularly suitable for delicate frozen
foods which are to be served cold e.g. cream
filled gateaux, cakes covered with icings or
frostings, cheesecakes, biscuits, scones, etc.
Using defrost
• The oven must be switched on before
setting any cooking function or
programme.
• Press the Oven Select Button until the main
oven cavity indicator is illuminated.
• Press the Function selector until the
required setting is illuminated.
• Wait 5 seconds until your choice is
confirmed. The temperature will
automatically set to 30°C.
• To switch off a function press the Function
selector once. The function neon will go
out and the display will return to the time
of day.
Things to note
• The oven fan and interior light will come on.
Main oven keep warm
This setting allows you to warm plates or keep
warm pre-cooked dishes prior to serving.
Using main oven keep
warm
• The oven must be switched on before
setting any cooking function or
programme.
• Press the Oven Select Button until the main
oven cavity indicator is illuminated.
• Press the Function selector until the
required setting is illuminated.
• Wait 5 seconds until your choice is
confirmed. The temperature will
automatically set to 80°C.
• To switch off a function press the Function
selector once. The function neon will go
out and the display will return to the time
of day.
Things to note
• The oven light will illuminate.
• The heat indicator neons will scroll until the
oven has reached the desired temperature
and then stop, an audible signal will sound.
When the oven has been switched off the
bars that are still lit indicate the remaining
residual heat in the oven.
• The cooling fan for the controls may
operate after a time.
• Some internal noise may be heard during
operation. This is quite normal.
Main oven base heat
finishing
This function can be used to finish off dishes
that may require extra base heat or where
base browning and crispiness are required for
pizzas or pies.
Using main oven base
heat finishing
• The oven must be switched on before
setting any cooking function or
programme.
• Press the Oven Select Button until the main
oven cavity indicator is illuminated.
• Press the Function selector until the
required setting is illuminated.
• Wait 5 seconds until your choice is
confirmed. The temperature will
automatically set to 150°C.
22