JVC CA-NXHD10R - Manual (Page 46)

– 41 –
To find and play the albums recently recorded, press
SELECT
¢ or SELECT 4 to select
“RECORDED?,” then SET.
The last recorded album starts playing (in this example,
album number 5—if the selected album has a title, it
will appears in the main display instead of the album
number).
• Each time you press SELECT ¢ or SELECT 4,
“PLAYED?” and “RECORDED?” alternately appear.
• To cancel the setting, press SEARCH MODE.
5
Press ALBUM + (or ALBUM –) to select an album you
want, then press SET.
The selected album starts playing in Continuous play.
When you unplug the AC power cord or if a power
failure occurs
The unit may lose the memory of those recently played or recorded
albums.
ALBUM SEARCH
AAC 128
SEARCH and
ALBUM indicators
Ex. When you want to play the 5th most recently
played album
LAST 10?
ALBUM T.?
(Album title?)
ALBUM No.?
(Album number?)
TRACK T.?
(Track title?)
Canceled
To search for one of the last 10 albums recently
played or recorded—LAST 10
You can easily find and play one of the last 10 albums
recently played* or recorded.
* Tracks played for more than one second can be stored as
the “played” tracks in memory.
On the remote control ONLY:
1
Press HDD 3/8, then 7.
The source is changed to “HDD.”
• If you have already started playback, you can skip
this step.
2
Press SEARCH MODE repeatedly until “LAST 10?”
is selected for “SEARCH MODE.”
The SEARCH and ALBUM indicators light up on the
display.
• Each time you press the button, Search Modes
change as follows:
3
Press SET.
The following message appears.
4
To find and play the albums recently played, press
SET again.
The last played album starts playing (in this example,
album number 5—if the selected album has a title, it
will appears in the main display instead of the album
number).
EN32-41_NXHD10R[B]f.pm6 02.6.24, 9:05 AM 41