How to remove the inner door glass, Warning, How to replace the inner door glass – John Lewis JLBIDOS906 User Manual

Page 35

Advertising
background image

35

How to remove the inner door
glass

1. Open the oven door slightly to gain access to the two cross

head screws on the top of the oven door.

2. Loosen the two screws using a Pozidrive screwdriver.

3. Holding the door glass securely in place with one hand

remove the screws and washers with the other hand.

The screws and washers retain the trim on the top of the

grill door. Note the position of the trim on the door.

4. Holding the door and glass with one hand, gently pull

towards you and slightly lift the door glass with the other

hand to disengage the panel from the location point at the

bottom of the door. Gently release the door to close it.

5.

Clean the outer and inner glass using hot soapy water or

hob cleaner should the inner face of the outer door glass be

heavily soiled it is recommended that soapy water with a

high concentration of soap is used. To prevent streaking a

glass cleaning spray may be applied and the glass polished

with a soft cloth. Ensure that all parts are thoroughly dry

before attempting to replace the outer door glass.

Warning

If the door glass panel becomes chipped or has deep

scratches the glass will be weakened and must be

replaced to prevent the possibility of the panel

shattering. Please contact your local Service Force

Centre who will be pleased to advise further.

H

ow to replace the inner door

glass

1.

Holding the oven glass with both hands, gently place the

locators into the holes of the brackets at the bottom of the

oven door.

2.

Holding the door glass with your left hand, use your right

hand to open the oven door.

3.

Bring the door gently towards the glass panel ensuring the

screw location holes line up.

4.

Place the trim in the correct position on the top of the grill

door.

5.

Hold the glass in place with one hand and insert the cross

head screws with washers into the location holes with the

other hand. Give the screws one turn to ensure the glass is

secure.

6.

Tighten the screws positively with a Pozidrive screwdriver

before closing the oven door.

Warning

Do not attempt to use the oven without the glass being

in place.

Advertising