Operations on vcr deck, Basic playback, Pg. 43 – JVC SR-MV50U User Manual

Page 43: Vcr lamp, Pg. 43, 44

Advertising
background image

Masterpage:Right0

EN

43

Filename [SR-MV50U_08VCR Operation.fm]

Page 43

February 24, 2006 9:43 am

OPERATIONS ON VCR DECK

1

Load a cassette. Make sure the window side is up, the rear label

side is facing you and the arrow on the front of the cassette is
pointed toward the unit.

● Do not apply too much pressure when inserting.

● If the record safety tab has been removed, playback begins

automatically. However, if “REC SAFETY” is set to “OFF” (

੬ pg. 73),

playback will not begin automatically.

● The unit’s power comes on automatically and the counter is reset to

0:00:00.

2

Press VCR/DVD repeatedly so that the VCR lamp lights up on

the unit.

3

Find the program start point. If the tape is advanced past the

start point, press 3. To go forward, press 5.

4

Press 4 to start playback.

5

Press 8 to stop playback.

● To eject the cassette, press x (VCR).

Basic Playback

● Turn on the unit.

● Turn on the TV and select the video channel (or AV mode).

● Slide the TV/CABLE/DBS/DVD switch to DVD.

x

8

4

5

3

VCR/DVD

1

4

7

2

5

8

0

3

6

9

5

3

4

8

VCR/DVD

Clean the video heads using a dry cleaning cassette
— TCL-3F — when:

● Rough, poor picture appears while a tape is played back.

● The picture is unclear or no picture appears.

● “USE CLEANING CASSETTE” appears on the screen (only with

“SUPERIMPOSE” set to “ON” or “AUTO”). (

੬ pg. 72)

NOTE:
The heads get dirty in the following cases:

● in an environment prone to extreme temperature or humidity

● in a dusty environment

● flaw, dirt or mold on video tapes

● continuous usage for a long time

Usable cassettes
Full-Size VHS
T-30 (ST-30**)
T-60 (ST-60**)
T90
T-120 (ST-120**)
T-160 (ST-160**)
ST-210**

Compact VHS*
TC-20 (ST-C20**)
TC-30 (ST-C30**)
TC-40 (ST-C40**)

* Compact VHS camcorder recordings can be played on this unit. Simply

place the recorded cassette into a VHS Cassette Adapter and it can be
used just like any full-sized VHS cassette.

** This unit can record on regular VHS and Super VHS cassettes. While

only VHS signals can be recorded on regular VHS cassettes , both
VHS and Super VHS signals can be recorded and played back using
Super VHS cassettes.

1) By using the S-VHS ET function, it is possible to record and play back

with S-VHS picture quality on VHS cassettes with this unit.

1)

SR-MV50US.book Page 43 Friday, February 24, 2006 9:43 AM

Advertising