JVC SR-MV50U - Manual (Page 48)

Filename [SR-MV50U_08VCR Operation.fm]
Masterpage:Left+
48
EN
Page 48 February 24, 2006 9:43 am
OPERATIONS ON VCR DECK
You can program this unit to timer record as many as 8 programs.
With the VCR Plus+ system, timer programming is greatly
simplified because each TV program has a corresponding code
number which your unit is able to recognize.
You can use the remote control to enter the PlusCode number.
1
Load a cassette with the record safety tab intact. If not, set
“REC SAFETY” to “OFF” ( ੬ pg. 73).
2
Press VCR/DVD repeatedly so that the VCR lamp lights up on
the unit.
3
Press VCR PLUS+ to access the VCR Plus+ screen.
4
Press the number keys to enter the
PlusCode number of a program you
wish to record, then press ENTER.
● If you have made a mistake, press
CANCEL and input the correct number
before you press ENTER.
● If the number you entered is invalid,
“ERROR” appears on the TV screen,
press CANCEL and input a valid PlusCode number.
5
The PlusCode number you entered
and the matching timer recording
information are displayed on the TV
screen. Check the program data.
● To cancel this setting, press VCR
PLUS+ or PROG/CHECK.
6
Press REC MODE to select the desired recording mode. Or
press w e to select “SP/EP”, then press rt to select the desired
recording mode.
7
Press ENTER to complete timer programming.
● To program another timer, repeat steps 3 – 7.
● If “PROGRAM NOT COMPLETED PROGRAM OVERLAP” appears
on the TV screen, see page 50.
8
Press VCR TIMER (#) to engage the unit’s timer mode. The
VCR timer indicator lights up on the front display panel and the
DVD deck is automatically selected. When the DVD deck is in timer
standby mode, the unit is automatically turned off.
● To disengage the timer mode, press VCR TIMER (#) again.
NOTES:
● To Timer Record Weekly Or Daily Serials:
— in step 5, press number key “9” for weekly serials or number key
“8” for daily serials (Monday — Friday). Either “WEEKLY” or “DAILY”
appears on the TV screen. Pressing the button again makes the
corresponding indication disappear.
● You can program this unit to timer record as many as 8 programs. If
you try to program the unit to record a ninth, “PROGRAM FULL”
appears on the TV screen and “FULL” appears on the front display
panel. To record the extra program, you must first cancel any
unnecessary programs. (
੬ pg. 50)
VCR Plus+ Timer Programming
● Make sure that the unit’s built-in clock is set properly.
● Turn on the unit.
● Turn on the TV and select the video channel (or AV mode).
● Slide the TV/CABLE/DBS/DVD switch to DVD.
IMPORTANT:
Make sure the channel position number you wish to record is
displayed; if not, see “Changing VCR Plus+ Setting” (
੬ pg. 74) and
set the Guide Channel number correctly.
1
4
7
2
5
8
0
3
6
9
0 – 9
RETURN
ENTER
VCR PLUS+
CANCEL
VCR TIMER (#)
VCR/DVD
REC MODE
PLUSCODE NO.
PRESS NUMBER KEY (0–9)
PRESS (VCR PLUS +)
TO END
VCR PLUS+ SYSTEM
PROGRAM 1
(PLUSCODE NO. 12345678)
START STOP
12:00 AM 13:00 AM
DATE CH SP/EP
1/ 30/04 15 SP
PRESS (RTYU, 8=DAILY
9=WEEKLY), THEN (ENTER)
(PROG/CHECK) TO END
IMPORTANT:
If you have moved to a different area or if a broadcasting station's
channel number has been changed, the wrong channel number will
be displayed on the VCR Plus+ program screen in step 5. When this
happens, set the correct Guide Channel number for that station.
(
੬ pg. 74, “Changing VCR Plus+ Setting”)
SR-MV50US.book Page 48 Friday, February 24, 2006 9:43 AM