JVC SR-MV50U - Manual (Page 76)

Filename [SR-MV50U_11Subsidiary.fm]
Masterpage:Left+
76
EN
Page 76 February 24, 2006 9:43 am
SUBSIDIARY SETTINGS
Finalizing DVD-R/RW discs recorded on this unit makes it possible
for the discs to be played back on other DVD players. DVD-RW
discs are finalized in the mode that the discs were formatted,
enabling playback on compatible DVD players.
Titles input in the Library Database DVD Navi are registered as
titles in the DVD menu. (
੬ pg. 53)
Before finalizing
● It is possible to record on a blank space.
● It is possible to enter a program title. ( ੬ pg. 53)
● It is possible to delete programs. ( ੬ pg. 53)
● It is impossible to overwrite recorded areas of DVD-R discs.
● Available recording capacity does not increase even if a recorded
program is deleted from a DVD-R disc.
● It is impossible to record or edit DVD-R/RW discs recorded on other
devices even if they have not been finalized.
After finalizing (For DVD-R/RW (Video mode) discs)
● Video and audio that have been recorded by then are recorded in
conformity to the DVD Video standard, enabling you to play back the
discs as DVD VIDEO discs.
● Although DVD-R/RW discs finalized on this unit become playable on
DVD players compatible with DVD-R/RW discs, some discs still may
not play, for which JVC cannot take responsibility.
● Marked points marked before finalizing will be deleted, and programs
will be divided automatically into “chapters” approximately every 5
minutes. (
੬ pg. 25)
● Depending on the DVD players and DVD-R/RW discs used, and on
the conditions of recording, it may not be possible to play back the
discs. In this case, play back the discs on this unit.
● Additional recordings become impossible.
Finalize A DVD-R/RW Disc
1
Perform steps 2 to 4 of “Format A DVD-RAM Disc” ( ੬ pg. 75)
before continuing.
2
Press rt to select “DISC TYPE”, then press ENTER. Press
w e to choose “MANUAL START”, “MENU STOP” or “AUTO
REPEAT”, then press ENTER.
“MANUAL START”: To be chosen when you want to playback the
disc manually by pressing 4 each time after
the disc is read.
“MENU STOP”: To be chosen when you want playback to stop
each time a menu screen is displayed. The
unit automatically starts playback after the disc
is read.
“AUTO REPEAT”: To be chosen when you want the disc to be
played back repeatedly each time it is played
back. The unit automatically starts playback
after the disc is read.
3
Press rt to select “FINALIZE”, then press ENTER. Press w e
to select “YES”, then press ENTER when “DISC WILL BE
FINALIZED” appears on the TV screen.
4
Press w e to select “OK”, then press ENTER when
“FINALIZING WILL MAKE DISC READ-ONLY” appears on the TV
screen.
5
Press SET UP to return to the normal screen.
● Menu screen is cleared.
● You can select whether to finalize a disc automatically after dubbing.
For details, refer to “Auto Finalizing” (
੬ pg. 58)
● Once a DVD-R/RW (Video mode) disc has been finalized, the
displays for original and play list do not appear. Only display for
library appears.
● Once a DVD-RW (VR mode) disc has been finalized, it can be played
on DVD players compatible with VR mode.
Cancel The Finalization Of A DVD-RW Disc
1
Load a DVD-RW disc to cancel the disc finalization, and perform
steps 2 to 4 of “Format A DVD-RAM Disc” ( ੬ pg. 75) before
continuing.
2
Press rt to select “CANCEL DISC FINALIZATION”, then
press ENTER.
3
Press w e to select “OK”, then press ENTER when “CANCEL
DISC FINALIZATION” appears on the TV screen.
4
Press SET UP to return to the normal screen.
● When the disc finalization is cancelled, the mode in which the disc
was formatted is restored, making the disc recordable. (
੬ pg. 8, 75)
Finalize A Disc (DVD Deck Only)
● Turn on the unit.
● Turn on the TV and select the video channel (or AV mode).
● Slide the TV/CABLE/DBS/DVD switch to DVD.
● Load a DVD-R/RW disc to finalize.
1
4
7
2
5
8
0
3
6
9
ENTER
SET UP
rtw e
VCR/DVD
SR-MV50US.book Page 76 Friday, February 24, 2006 9:43 AM