JVC A-UXP38V - Manual (Page 21)

– 18 –
English
Display of Operating Status
You can view the current operating status on the TV screen.
Press the ON SCREEN button.
Pressing the above button alternates between on-screen display
ON and OFF.
• Once you have turned on the on-screen display, the track
number and playing time are always displayed on the TV
screen.
Viewing the Video Intro of Video CDs
You can check the contents of a video CD, watching the first
5 seconds of each track on the disc.
1
Play the video CD with or without PBC.
• Load the video CD with or without PBC.
• Press the SELECT CD
3/8 button, then press the 7
button.
2
Press the VIDEO INTRO button.
The Video Intro Play starts and the first 5 seconds portions
of the first nine tracks are played in sequence.
1 2 3
4 5 6
7 8 9
• If the video CD has more than nine tracks, the tracks whose
track number is greater than nine will be displayed on the
next page when the MULTI KEY > or NEXT
¢ is
pressed.
• This function is not available in PBC mode or during
playback.
To select a track during Video Intro Play, press the VCD
No +/– buttons on the Remote Control to select the track and
then press the SELECT CD
3/8 button. Continuous play starts
from the selected track. When you use the Unit, press the
REV.MODE/VCD NUMBER button and press the PREV
4
or
¢ NEXT buttons to select the track, then press the
CD
3/8 SELECT button.
To stop and cancel the Video Intro Play, press the
7.
EN12-19.UX-P38[US,UB,UN] 31/07/2001, 10:25 am 18