JVC A-UXP38V - Manual (Page 25)

– 22 –
English
Using the Multiplex CDs
If the source you are going to play is a multiplex CD, you can
use the Multiplex Sound function.
What is Multiplex Sound?
In a multiplex CD or VCD, two separate languages are recorded
on the left and right channel. With this system, you can select
your choice of language you wish to listen to.
1
Turn on the TV and select the video input on
the TV.
2
Press the MPX button on the remote control to
select the MPX mode.
Each time you press the button, MPX mode changes as
follows.
MPX: LCH MONO RCH MONO STEREO
LCH MONO: Only the left channel (instrumental parts) are
played through both speakers.
RCH MONO: Only the right channel (vocal parts) are
played through both speakers.
STEREO: Normal stereo mode.
• You can also use MPX mode during playback.
• MPX status is not indicate on the display.
• To return to Normal stereo mode press the MPX button
on the remote control until “STEREO” appear on the
display.
3
Play a multiplex CD.
To play a video CD with PBC, see page 15.
4
Adjust the main volume control to the loudness
you want.
• If you want to record on a tape, carry out CD Direct
Recording or One Track Recording. (See page 21.)
EN20-26.UX-P38[US,UB,UN] 31/07/2001, 10:25 am 22