Juniper Networks EX4200 - Manual (Page 201)

Figure 68: Removing a Fan Tray from an EX3200 Switch
Figure 69: Removing a Fan Tray from an EX4200 Switch
NOTE: When a fan tray is removed, Fan/Blower is Absent is logged in the system
log and the system raises a minor alarm.
Related Topics ■ Installing a Fan Tray in an EX3200 or EX4200 Switch on page 132
■ Installing and Removing EX3200 and EX4200 Switch Hardware Components on
page 129
■ Cooling System and Airflow in an EX3200 Switch on page 31
■ Cooling System and Airflow in an EX4200 Switch on page 32
■ Field-Replaceable Units in EX3200 and EX4200 Switches on page 16
■ Rear Panel of an EX3200 Switch on page 9
■ Rear Panel of an EX4200 Switch on page 11
Removing an Uplink Module from an EX3200 or EX4200 Switch
If your EX3200 or EX4200 switch includes an optional field-replaceable unit (FRU)
uplink module, it is installed in the switch's front panel. The different types of uplink
modules are described in “Uplink Modules in EX3200 and EX4200 Switches” on
page 33.
Removing an Uplink Module from an EX3200 or EX4200 Switch ■ 175
Chapter 13: Removing Switch Components