Juniper Networks EX4200 - Manual (Page 35)

■ Installing an Uplink Module in an EX3200 or EX4200 Switch on page 133
■ Removing an Uplink Module from an EX3200 or EX4200 Switch on page 175
Rear Panel of an EX3200 Switch
The rear panel of the EX3200 switch consists of the following components:
■ Protective earthing terminal
■ Temperature shutdown LED
■ Management Ethernet port
■ Console port
■ USB port
■ ESD point
■ Fan tray
■ Power supply
Figure 3 on page 9 shows the rear panel of an EX3200 switch with a 320 W power
supply. All EX3200 switches have the same rear panel. The 320 W AC power supply
and the 190 W DC power supply are flush with the chassis. The 600 W AC power
supply and 930 W AC power supply extend out of the chassis by 2.25 in. The power
cord retainer clips extend out of the power supply by 3 in.
Figure 3: EX3200 Switch Rear Panel
Related Topics ■ Field-Replaceable Units in EX3200 and EX4200 Switches on page 16
■ Front Panel of an EX3200 Switch on page 8
■ USB Port Specifications for an EX Series Switch on page 39
■ Cooling System and Airflow in an EX3200 Switch on page 31
■ Power Supply in EX3200 and EX4200 Switches on page 26
■ Prevention of Electrostatic Discharge Damage on EX Series Switches on page 236
Rear Panel of an EX3200 Switch ■ 9
Chapter 1: EX3200 and EX4200 Switches Overview