Juniper Networks EX4200 - Manual (Page 34)

Front Panel of an EX3200 Switch
The front panel of an EX3200 switch consists of the following components:
■ 10/100/1000Base-T Gigabit Ethernet ports, some or all of which are enabled for
Power over Ethernet (PoE)
■ Uplink module ports—SFP, SFP+, or XFP ports (The uplink module is an optional
feature.)
■ LCD panel and the LCD navigation buttons
■ Chassis status LEDs
■ Network port LEDs
Figure 1 on page 8 shows the front panel of an EX3200 switch with 48 Gigabit
Ethernet ports. Figure 2 on page 8 shows the front panel of an EX3200 switch with
24 Gigabit Ethernet ports. Models are available that have either all ports equipped
for Power over Ethernet (PoE) or only 8 ports equipped for PoE. All ports have
10/100/1000Base-T Gigabit Ethernet connectors.
Figure 1: EX3200 Switch with 48 Gigabit Ethernet Ports
Figure 2: EX3200 Switch with 24 Gigabit Ethernet Ports
Related Topics ■ Chassis Status LEDs in EX3200 Switches on page 17
■ Rear Panel of an EX3200 Switch on page 9
■ Network Port LEDs in EX3200 and EX4200 Switches on page 20
■ Network Port Connector Pinout Information for an EX3200 or EX4200 Switch
on page 40
■ LCD Panel in EX3200 and EX4200 Switches on page 13
■ Installing and Removing EX3200 and EX4200 Switch Hardware Components on
page 129
8 ■ Front Panel of an EX3200 Switch
Complete Hardware Guide for EX3200 and EX4200 Ethernet Switches