Basic operations, English, Turning the power on and off – JVC RX-730R User Manual

Page 17: Selecting the source to play, Page 12

Advertising

Page 12

English

VOLUME

100

10k

Current source
name appears

Volume level is also
shown here
whenever the power
is on.

Front panel

Remote: Outside

AUDIO

STANDBY

STANDBY/ON

STANDBY

STANDBY/ON

Basic Operations

The following operations are commonly used when you play any sound source.

Turning the Power On and Off

On the front panel:

To turn on the power, press STANDBY/ON

The STANDBY lamp goes off. The name of the current source (or station frequency) appears on the
display.

To turn off the power (into standby mode), press STANDBY/ON

again.

The STANDBY lamp lights up.

From the remote control:

To turn on the power, press AUDIO

The STANDBY lamp goes off. The name of the current source appears on the display.

To turn off the power (into standby mode), press AUDIO

again.

The STANDBY lamp lights up.

Note:
Pressing STANDBY/ON

or AUDIO

again turns off the power (into standby mode) and lights the

STANDBY lamp. A small amount of power is consumed in standby mode. To turn the power off completely,
press

POWER to set it in the

—

OFF position on the front panel.

Selecting the Source to Play

You need to select the source before you start playing any source.

On the front panel:

1. Press SOURCE so that the Control

% / fi

fi buttons work for selecting the source.

2. Press Control

% / fi

fi until the source name you want appears on the display.

The selected source lamp also lights up.