Using the sea modes, English – JVC RX-730R User Manual

Page 32

Advertising

Page 27

English

Using the SEA Modes

The SEA (Sound Effect Amplifier) modes give you control of the way your music sounds.

Note:
The SEA modes cannot be used for recording.

Selecting Your Favorite SEA Mode

On the front panel:

1. Press SEA MODE so that the Control

% / fi

fi buttons work for selecting the SEA mode.

The lamp next to the button lights up.

2. Press Control

% / fi

fi until the mode you want appears on the display.

Each time you press the button, the SEA mode changes as follows:

Note:
When the SEA mode is turned on, the SEA indicator lights up on the display.

ROCK:

Gives a heavy sound. Both high and low frequencies are boosted.

MUSICAL:

Enhance the mid-frequency range, which the human voice is mostly made up of.

MOVIE:

Adds breadth to sounds so you feel like you are in a movie theater.

COUNTRY:

Enhances the high-frequency range so that instruments such the violin and banjo
are emphasized.

JAZZ:

Gives a feeling of a live atmosphere. Good for acoustic music.

USERMODE:

Your original SEA adjustment (see page 28).

SEA OFF:

No SEA mode is applied (see below).

To cancel the SEA mode, press Control

% / fi until “SEA OFF” appears in step 2 above.

The SEA indicator goes off from the display.

From the remote control:

Press SEA MODE repeatedly until the SEA mode you want appears on the display.
Each time you press the button, the SEA mode changes as follows:

Note:
When the SEA mode is turned on, the SEA indicator lights up on the display.

To cancel the SEA mode, press SEA MODE repeatedly until “SEA OFF” appears on the display.
The SEA indicator goes off from the display.

SEA MODE

Front panel