English – JVC RX-730R User Manual
Page 22
Page 17
English
See also
page 38.
SETTING
Front panel
LARGE
SMALL
NO
SURROUND MODE
Selecting the Center Speaker Size
You can register the information on the center speaker after all connections are completed.
If you do this registration first, you do not have to adjust the center speaker mode when you want to activate
the Dolby Surround. However, to register the information, first you have to set the surround mode either to
“PROLOGIC” or “3CHLOGIC.” (You cannot select the center speaker size when the surround mode is
“SURR OFF” or “HALL.”)
On the front panel only:
1. Press SURROUND MODE so that the Control
%
%
%
%
% / fi
fi
fi
fi
fi buttons work for selecting the surround
mode.
The lamp next to the button lights up.
2. Press Control
%
%
%
%
% / fi
fi
fi
fi
fi until “PROLOGIC” or “3CHLOGIC” whichever you want appears on the
display.
The PRO LOGIC or 3CH LOGIC indicator (as well as the SURROUND indicator) also lights up.
3. Press SETTING so that the Control
%
%
%
%
% / fi
fi
fi
fi
fi / @
@
@
@
@ / #
#
#
#
# buttons work for selecting the center speaker
size.
The lamp next to the button lights up.
4. Press Control
%
%
%
%
% / fi
fi
fi
fi
fi until “CNTR SPK” (Center Speaker) appears on the display.
5. Press Control
@
@
@
@
@ / #
#
#
#
# to select the appropriate item about your center speaker.
Each time you press the button, the display changes to show the following:
LARGE:
Select this mode when the size of the center speaker is the same as that of the
front speakers.
SMALL:
Select this mode when the size of the center speaker is smaller than that of the
front speakers.
NO:
Select this mode when you do not use a center speaker.
(You cannot select this mode when “3CHLOGIC” is selected for the surround
mode.)
Note:
This center speaker size setting is so related to the center mode setting for the Dolby Surround mode that
changing this setting affects and changes the center mode to a relevant mode, and vice versa.
For example;
• If you select “LARGE,” the center mode is automatically set to “WIDE,” and vice versa.
• If you select “SMALL,” the center mode is automatically set to “NORMAL,” and vice versa.
• If you select “NO,” the center mode is automatically set to “PHANTOM” for Pro Logic and vice versa.
MENU
RX-730RBK(EF)0054-001A.En.01-28
97.7.25, 6:27 PM
17