English, Page 43, Cd player – JVC RX-730R User Manual
Page 48: Cd player-changer, Cassette deck, Turntable
Page 43
English
CD player
After pressing CD (either on the SOURCE SELECT section of the outside panel or on the remote mode section
of the inside panel), you can perform the following operations on a CD player:
3
Starts playing.
4
Returns to the beginning of the current (or previous) track.
¢
Skips to the beginning of the next track.
7
Stops playing.
8
Stops playing temporarily. To release it, press
3.
1 — 10, +10
Selects a track number directly
For track number 5, press 5.
For track number 15, press +10, then 5.
For track number 20, press +10, then 10.
For track number 30, press +10, +10, then 10.
Note:
To activate the remote control for CD operations, you can use either one of the CD buttons — the one on
the SOURCE SELECT section; the other on the remote mode section. If you press the one on the remote
mode section, you can operate the CD player using the remote control, but the playing source will not be
changed to “CD.”
CD player-changer
After pressing CD DISC (on the remote mode section of the inside panel), you can perform the following
operations on a CD player-changer:
3
Starts playing.
4
Returns to the beginning of the current (or previous) track.
¢
Skips to the beginning of the next track.
7
Stops playing.
8
Stops playing temporarily. To release it, press
3.
1 — 6, 7/P
Select the number of a disc installed in a CD player-changer.
Cassette deck
After pressing TAPE (either on the SOURCE SELECT section of the outside panel or on the remote mode
section of the inside panel), you can perform the following operations on a cassette deck:
3
Starts playback.
1
Fast winds the tape from right to left.
¡
Fast winds the tape from left to right.
7
Stops operation.
8
Stops playing or recording temporarily. To release it, press
3.
¶
Press this button with
3 to start recording.
Press this button with
8 to enter the recording standby mode.
Without pressing TAPE (either on the SOURCE SELECT section of the outside panel or on the remote
mode section of the inside panel), you can always perform the following:
TAPE
Changes the direction of tape running.
Note:
To activate the remote control for deck operations, you can use either one of the TAPE buttons — the one
on the SOURCE SELECT section; the other on the remote mode section. If you press the button on the
remote mode section, you can operate the cassette deck using the remote control, but the playing source
will not be changed to “TAPE.”
Turntable
After pressing PHONO (on the SOURCE SELECT section), you can perform the following operations on a
turntable:
3
Starts playing.
7
Stops playing.
Remote: Outside
CD
CD DISC
TAPE
Remote: Outside
4
3
2
7/
P
6
8
1
5
TEST
DELAY
+
–
CENTER
+
–
REAR
FM
TV/VIDEO
PTY SELECT
PTY SEARCH
PTY SELECT
DISPLAY MODE
+
–
TAPE
Remote: Inside
PHONO
Remote: Outside
TV/VIDEO
PTY SELECT
PTY SEARCH
PTY SELECT
DISPLAY MODE
+
–
TAPE
Remote: Inside
CD
4
3
2
7
/P
6
0
10
+10
8
1
5
9
PRESET
CHANNEL
TEST
TV
VOLUME
DELAY
+
–
CENTER
+
–
REAR
TV/VIDEO
PTY SELECT
PTY SEARCH
PTY SELECT
DISPLAY MODE
+
–
FM
MODE/MUTE
TAPE
Remote: Inside
TAPE
4
3
2
7/P
6
0
10
+10
8
1
5
9
PRESET
CHANNEL
TEST
TV
VOLUME
DELAY
+
–
CENTER
+
–
REAR
TV/VIDEO
PTY SELECT
PTY SEARCH
PTY SELECT
DISPLAY MODE
+
–
FM
MODE/MUTE
TAPE
Remote: Inside
RX-730RBK(EF)0054-001A.En.42-52
97.7.25, 7:06 PM
43