Sanyo MCD-UB685M - Manual (Page 12)

11
Various playing mode
Press the REPEAT/RANDOM button repeatedly
to select a various play mode available. Each
time the button is pressed, the mode changes
as shown below:
3. Select a track by using the f/FILE- or
FILE+/ e button.
4. Press the MEMORY/FOLDER button.
5. Repeat steps 3 - 4 to programme addition-
al tracks.
6. Press the PLAY/PAUSE i button to start
playback. “MEMORY” remains lit.
When all programmed tracks have been
played, the player stops automatically.
- The programme contents are retained
in memory.
- Any attempt to programme more than 20
tracks will result in “FUL” appears and
discontinuous of the programming.
- To cancel programmed play, press the STOP
n button twice during play.
Checking the programme
In stop mode when MEMORY remains lit press
the MEMORY/FOLDER button repeatedly,
the programmed details sequentially appear
on the display.
Changing a programme
To add a new track to a programme:
1. In the stop mode, press the MEMORY/FOLD-
ER button repeatedly until last programme
number is displayed.
2. Select a track as explained above.
3. Press the MEMORY/FOLDER button.
To change a track:
1. In the stop mode, press the MEMORY/FOLD-
ER button repeatedly until the programme
number to be replaced is displayed.
2. Select a track as explained above.
3. Press the MEMORY/FOLDER button.
Note:
Programmed details cannot be partially deleted
or inserted.
[CD]
“REPEAT 1” appears “REPEAT” appears
(Repeat one track) (Repeat all tracks)
“RANDOM” appears
(All tracks on the disc
are played back in
random order.)
Released
(Normal play)
[MP3 CD] [USB] [SD]
“REPEAT 1” appears
(Repeat one track)
“REPEAT FOLDER”
appears
(Repeat all tracks in
the folder)
“REPEAT” appears
(Repeat all tracks)
“RANDOM” appears
(All tracks on the disc
are played back in
random order.)
Released
(Normal play)
Note:
- Random play will not be selected during pro-
grammed playback.
PROGRAMMED PLAY
Up to 20 tracks on a disc can be programmed for
play in any order.
- To begin the programming procedure, set
function switch to “CD/USB/SD” first.
- The same track can be programmed more
than once.
- Load a disc that you want to programme be-
fore starting programmed play.
1. Press the STOP n button if necessary.
2. Press the MEMORY/FOLDER button, the
“P01” and “MEMORY” appear briefly then
“ ” appears and “MEMORY” blinks.
MEMORY
MEMORY
MEMORY
685XEEn.indd 11 2008.7.23 8:39:16 AM