Recording, Listening to the radio – Sanyo MCD-UB685M User Manual

Page 18

Advertising
background image

17

RECORDING

Recording copyright material without permission

of the copyright owners is usually an infringement.

If you wish to re-record copyright material,

permission from the copyright owner is necessary.

SANYO does not approve of, and cannot be held

responsible for, any unlawful use of this machine.

Recording from CD and USB Memory

device / SD Card

(Synchronous recording)

1. Load a blank cassette.

2. Set the FUNCTION switch to CD/USB/SD and

select the CD or USB or SD function.

3. Load a CD or insert an USB memory device

or a SD card.

- Select the track or file number if re-

quired.

- For programmed recording, pro-

gramme the material in advance.

4. Press the REC button. The PLAY button

is engaged simultaneously and recording

starts.

5. Press the STOP/EJECT button to stop

recording at any time. When the end of the

tape is reached, deck stop automatically and

the playback of CD or USB memory device or

SD card enters pause mode.

- When you want to record music as

you listen, press the REC button. Re-

cording starts automatically from the

beginning of the track or file.

Recording from the radio or other sources

1. Load a blank cassette.

2. Tune in the radio station to be recorded or play

other sources.

3. Press the REC button to start recording.

4. Press the STOP/EJECT button to stop

recording.

When beat is heard

Beat (a high-pitched noise) may sometimes be

heard during the recording of radio broadcasts.

If this occurs, set the BEAT CANCEL switch (the

back of the unit) to 1 or 2 position that reduces

the level of the beat noise.

LISTENING TO THE RADIO

1. Set the FUNCTION switch to RADIO.

2. Select the desired radio band with the BAND

switch.

3. Tune in a desired station by turning the

TUNING control.

4. To turn the radio off, set the FUNCTION

switch to TAPE/OFF or CD/USB/SD or LINE

IN.

To receive FM stereo broadcasts

Set the FM MODE select switch (the back of the

unit) to ST.

- If the signal from an FM stereo station is weak

and reception is poor, set the FM MODE

select switch to MONO. The reception may be

improved, but the sound will be monaural.

To improve reception

FM: Pull out the telescopic aerial and adjust

its position.

AM: Rotate the unit.

685XEEn.indd 17

2008.7.23 8:39:22 AM

Advertising