Star Micronics LC-90 NX-1010 - Manual (Page 17)

Loading paper 11
❏
Pick up the stack of paper with both hands, and fan through the paper with
your thumb. This prevents paper from sticking together when it is fed by
the automatic feeder.
Note:
The automatic sheet feeder can hold about 55 sheets of paper at one time.
❏
Make sure that all four edges of the stack are smooth and even. Tap the
edges on the top of a table or a desk to even them out.
❏
Carefully place the paper into the paper tray against the right-hand
stationary paper guide. Make sure that the left and right edges of the paper
stack are under the retaining clips inside the tray.
Paper guides
Retaining clip