Star Micronics LC-90 NX-1010 - Manual (Page 43)

37
Chapter 4: Control Panel Operations
The control panel gives you push-button control over the printer’s power and
paper feed operations. It also includes an indicator light that tells you the current
status of the printer at a glance.
Note:
For full details on paper handling, see page 39 of this manual.
To enter the Sleep Mode
❏
Hold down Power for a few seconds. The printer beeps when it enters the
Sleep Mode.
❏
For details about the Sleep Mode, see page 21 of this manual.
Important!
We recommend that you unplug the printer from the power outlet whenever you
do not plan to use it for long periods. Because of the this, you should locate the
printer so that the power outlet it is plugged into is nearby and easy to access
To restore full power from the Sleep Mode
❏
Press Power .
Important!
The printer automatically enters the Sleep Mode when you plug it in to an AC
outlet. Be sure to press
Power to power up the printer after plugging it in.