Getting ready to print – Star Micronics LC-90 NX-1010 User Manual
Page 39
Getting ready to print
33
Getting ready to print
Before printing, there are a number of things you must first do to set up the
printer. You must select the printer driver, and the paper source, size, and
orientation. Use the following procedure to make these selections.
Note:
You do not need to perform printer driver and paper selections mentioned
above each time you print, but only if there are any changes to the last
selections you made.
❏
In the Windows Program Manager, open the
Main
group by clicking on its
icon.
❏
Double click on the
Control Panel
icon.
❏
Double-click on the
Printers
icon in the
Control Panel
window.
❏
Double-click on the name of the printer model you selected above to select
it as the default printer.
❏
Click on
Setup
to display the window for setting up your printer.
❏
From this window you select buttons that let you control a wide variety of
printer setup parameters. This manual does not include any information
about how to do this because everything you need to know is included in an
on-line manual that tells you how to use all the buttons and menus that
appear. To view the on-line manual, click on
Help
button.