Samsung CLP-775 SERIES - Manual (Page 58)

Machine status and advanced features_ 58
Emulation
Color
Network
Select Form a Form overlay is images stored in the printer
hard disk drive (HDD) as a special file format
that can be printed in layers on any document.
(See "Form file" on page 89.)
• Select Form is not displayed when
Form Menu is set as Off.
• 2nd Form is displayed when Form
Menu is set as Double Form.
Language Allows you to change the language that appears
on the display. (See "Changing the display
language" on page 40.)
Power Save Reduce energy consumption by setting power
saving features. (See "Using power saving
feature" on page 41.)
Wakeup Event You can set the condition to wake up from
power-save mode. Set the item on.
• Button Press: When you press power
button, the machine wake up from the power
save mode.
• Printer: When you open or close the paper
tray, the machine wake up from the power
save mode.
Auto Continue This item determines whether or not the
machine continues printing when it detects
paper that is not matched to your paper setting.
• Off: If a paper mismatch occurs, the
message remains on the display and the
machine remains off-line until you insert the
correct paper.
• On: If the paper is mismatched, an error
message displays. The machine goes
off-line for 30 seconds then automatically
clears the message and continues printing.
Altitude Adjustment Print quality is affected by atmospheric
pressure. The atmospheric pressure is
determined by the height of the machine above
sea level. This feature lets you adjust the
altitude in a height district. The higher the
altitude, the higher the adjustment, the highest
being High 3. (See "Altitude adjustment" on
page 40.)
Auto CR This option allows you to append the required
carriage return to each line feed, which is useful
to the Unix user or DOS user.
Job Timeout You can set the amount of time a single print job
is active before it must print. The machine
handles incoming data as a single job, if it
comes in within the specified time. When an
error occurs while processing data from the
computer and the data flow stops, the machine
waits the specified amount of time and then
cancels printing if data flow does not resume.
Maintenance This menu allows you to maintain consumables
within the machine and check supplies' life. You
can clean fuser components.
Option Description
Clear Settings This menu item allows you to restore the
printer's factory default settings.
Spooling a To spool documents in HDD for the network
printing, select On.
a. This menu item is available when the optional hard disk is installed.
Option Description
Emulation Type The machine language defines how the
computer communicates with the machine.
If you select Auto, your machine can change the
machine language automatically.
Setup You can set the detailed settings for the
emulation type you selected.
Option Description
Custom Color This menu allows you to adjust contrast, color by
color.
• Default: Optimizes colors automatically.
• Manual Adjust: Allows you to manually
adjust the color contrast for each cartridge.
It is recommended to use the Default setting for
best color quality.
Auto Color Reg. You can adjust the position of color texts or
graphics to match the position of the printed
colors to those on your screen.
If you have moved the machine, it is
strongly recommended to operate this
menu manually.
Density Calibration You can manually calibrate the toner density of
machine for the best possible color print quality.
Density Control The machine automatically calibrates the toner
density of machine for the best possible color
print quality.
If you select Off, the machine is calibrated by
the factory default toner density.
Option Description
Ethernet Speed Configure the network transmission speed.
Option Description