Troubleshooting, Redistributing toner – Samsung CLP-775 SERIES User Manual
Page 68
Troubleshooting_ 68
10.
troubleshooting
This chapter gives helpful information for what to do if you encounter an error. If your machine has a display screen, check
the message on the display screen first to solve the error. If you cannot find a solution in this User's Guide or the problem
consists, call for service.
This chapter includes:
•
•
•
•
Understanding display messages
•
Redistributing toner
When a toner is low, faded or light areas may appear. It is possible that
colored images may be printed with incorrect colors due to flawed mixing of
toner colors when the toner level of the colored toner cartridge is low. You
can temporarily improve print quality by redistributing the toner.
•
The toner-related message saying that the toner is low may appear on
the display.
1. Using the handle, completely open the front cover.
•
Do not touch the green surface, the OPC drum or the front of
the toner cartridge, with your hands or any other material. Use
the handle on each cartridge in order to avoid touching this
area.
•
Be careful not to scratch the surface of the paper transfer belt.
•
If you leave the front cover open for more than a few minutes,
the OPC drum can be exposed to light. This will cause damage
to the OPC drum. Close the front cover when the installation
need to be halted for any reason.
2. Press the green release handle to release the paper transfer belt.
Holding the handle on the paper transfer belt, lift it out of the machine.
3. Grasp the handles on the toner cartridge and pull the cartridge out.
If you open the front cover, be careful not to touch the underneath
the control panel (the lower part of the fuser unit). The temperature