SOYO Motherboard SY-6BA+ IV - Manual (Page 45)

Hardware Installation SY-6BA+ IV
41
2-3.3.6 AGP VGA Card
Insert the AGP VGA card into the AGP slot. Then connect the monitor
information cable to the AGP card back plane external connector.
Follow the manufacturer's instructions to perform the AGP VGA drivers
installation.
Other Display Cards: Insert other types of VGA cards into the PCI or
ISA expansion slots according to card specifications.
2-3.3.7 PCI Audio Card
Some PCI soundcards require a PC-PCI DMA channel. Attach the 5-pin
cable from your PCI audio card to the SB-LINK ™ header on the
Motherboard. The SB-LINK ™ will forward requests for legacy DMA
channel to the PCI Bus.
1
2 5
6
4
DGND DGND
PC/PCI Request
Sideband Signal
PC/PCI Grant
Sideband Signal
Serial IRQ
SB-LINK (PC/PCI)
Pin Assignment
TM