SOYO Motherboard SY-6BA+ IV - Manual (Page 85)

BIOS Setup Utility SY-6BA+ IV
81
3-8.1 IDE Device Controls
IDE Controls Setting Description Note
Disabled IDE HDD Block Mode
Enabled Invokes multi-sector
transfer instead of one
sector per transfer. Not
all HDDs support this
function. Default
mode 0-4 0 is the slowest speed
4 is the fastest speed IDE
Ø Primary Master PIO
Ø Primary Slave PIO
Ø Secondary Master PIO
Ø
Secondary Slave PIO
Auto For better performance
and stability, we suggest
you use the Auto setting
to set the HDD control
timing. Default
Disabled IDE
Ø Primary Master UDMA
Ø Primary Slave UDMA
Ø Secondary Master UDMA
Ø Secondary Slave UDMA Auto Select Auto to enable
Ultra DMA Mode
support. Default
Disabled Turn off the on-board
IDE On-Chip PCI IDE
Ø Primary
Ø Secondary
Enabled Use the on-board IDE Default
3-8.2 Keyboard Controls
Keyboard Controls Setting Description Note
Disabled Turn off the on-board IDE Default USB Keyboard Support
Enabled Use a USB keyboard
PCI Slot Default Init Display First
AGP
Choose which card –
AGP Display card or PCI
VGA card – to initialize
first.