Sony STR-DE1015G - Manual (Page 11)

11
Getting Started Hooking Up the System
TV-VCR Hookups
You must connect a TV to control the receiver using the
on-screen display. Also, to enjoy the Dolby Pro Logic
Surround encoded videos and TV programs, you need
to connect TV and VCRs together with the center and
rear speakers.
If your components are Sony products, connect them to
the jacks as shown in the table on page 19, this makes
IR registration is unnecessary.
p STR-DE1015G
For digital connections see “Digital Component
Hookups” (page 13)
p STR-DE815G and STR-DE760Z
* TV/DBS : USA, Canada and Australia
TV : Other countries
What cables will I need?
• Audio/video cable (not supplied)
• Video cable (not supplied)
Make sure to match the color of the plugs and the
jacks: Yellow (video) to Yellow; White (left, audio) to
White; and Red (right, audio) to Red. If your
components have S-video jacks, we recommend that
you use the S-video jacks instead of the video jacks.
Ç : signal flow
a MONITOR (to TV or monitor)
Be sure to use your TV as a monitor, and use the TV
tuner built-in to the VCR to watch TV programs. If
you use your TV’s tuner, the on-screen display will
change to a TV program when you switch channels.
Also, do not connect anything to the TV/DBS* IN
jacks.
If you connect a Sony TV with TV OUT jacks, you can
use the TV tuner in your TV (see page 28 for details)
and the TV/DBS IN jacks without disrupting the on-
screen display.
b VIDEO 1, 2 (to VCR)
Connect VCRs to the VIDEO 1 or/and VIDEO 2 jacks.
If you connect a Sony StarSight tuner, connect it to the
VIDEO 1 jacks.
d TV/DBS*
5.1 INPUT
Yellow
b VIDEO 1, 2 a MONITOR
e VIDEO 3 INPUT
(on the front panel)
c LD/DVD
d TV/DBS* b VIDEO 1, 2 a MONITOR
e VIDEO 3 INPUT
(on the front panel)
c LD/DVD
White (L)
Red (R)
Yellow
White (L)
Red (R)
Yellow Yellow
Receiver
Monitor
S-LINK
CTRL S
VIDEO
OUT
MONITOR
INPUT
S-VIDEO
IN
OUT
L
R
S-LINK
CTRL S
VIDEO
OUT
AUDIO
OUT
VIDEO
IN
AUDIO
IN
VIDEO 1
OUTPUT
VIDEO VIDEO
AUDIO AUDIO
L
R
INPUT
S-VIDEO S-VIDEO
OUT OUT IN
Receiver
VCR