Sony STR-DE1015G - Manual (Page 58)

58
Front Panel Operations (Remote Short-cuts: USA and Canada only)
p OTHER SETUP
Center speaker delay
Initial setting is : CENT. DELAY 0
See page 39 for details.
Rear speaker delay
Initial setting is : REAR DELAY 5
See page 39 for details.
Dimmer level
This setting lets you select brightness of the display on the
front panel.
• You can select between four different settings.
Control A1 display
Initial setting is : CTRL A1 [AUTO]
This setting lets you specify the display mode for Control A1
components.
• AUTO displays “PLAY”, “STOP”, “PAUSE” or “REC” for
about 8 seconds when the operation switches.
• FIX displays “PLAY”, “STOP”, “PAUSE”, “REC” or the
contents of a disc or track memo of a CD or MD at all
times.
• OFF turns off the operation status display.
Notes
• This setting is only effective when the IR code setting is
set to Sony Control A1.
• If the disc or track memo contains a character that the
receiver cannot display, “.” appears for that character.
Set up parameters (STR-DE1015G)
p SPEAKER SETUP (see pages 22 to 23 for details)
Front speaker
Initial setting is : FRONT SP [LARGE]
Center speaker
Initial setting is : CENTER SP [LARGE]
Rear speaker
Initial setting is : REAR SP [LARGE]
Rear speaker place
Initial setting is : REAR SP [SIDE]
Sub woofer
Initial setting is : SUB WOOFER [ YES ]
p FUNCTION HOOKUP
VIDEO1, VIDEO2, LD/DVD, TV/DBS, TAPE, DAT/MD, CD,
PHONO
Initial setting is : YES
These settings let you delete the names of unconnected
components from the function lists.
• YES displays the name of the respective component
(jacks).
• NO deletes the name of the respective component (jacks).
Notes
• When a function is set to “NO”, it cannot be selected.
• If an S-LINK signal (Control A1, Control-S) is input to
the S-LINK jack from a component whose function was
set to “NO”, the function will automatically switch to
“YES” and that function will be selected.
• When using the remote, “NO CONNECTION” is
displayed if you select a function that was set to “NO”
(USA and Canada only).