Recording, Getting started playback/recording, P recording to audio tape or md 1 – Sony STR-DE1015G User Manual
Page 31
31
Getting Started
Playback/Recording
Recording
You can control both playback and recording
components using the receiver's on-screen display. If
necessary, see the instructions of your recording
component.
p Recording to audio tape or MD
1
Click FUNCTION in the main menu.
2
Click the playback component you want (e.g.,
CD).
3
Click SUB.
4
Click REC EDIT.
5
Click a recording component (e.g., TAPE).
The control buttons for both components appear.
“PLAYER” for the playback component, and
“RECORDER” for the recording component.
The arrow indicates the operative component.
6
Insert a blank tape into the recording component
(tape deck, etc.) and adjust the recording level, if
necessary.
7
Click REC to start recording, then click the play
button (
() on the PLAYER control.
Recording starts. Do not click any RECORDER
controls while recording. This will cut off the
source being recorded.
To stop recording
Click the recording component‘s
p control.
To control the recorder after recording
Click RECORDER. RECORDER becomes the operative
component and you can use the RECORDER controls to
rewind and playback the recording (etc.).
Click PLAYER to operate the playback component.
To return to the main menu
Click EXIT.
Digital recording (STR-DE1015G only)
If you connect your CD player and DAT(or MD) deck using
digital connections (see page 13) and specify the OPTICAL
jacks for both components (see page 27), the previous
operations will let you make digital recordings from CD to
DAT (or MD).
Notes
• If you leave the REC EDIT menu by clicking FUNCTION,
SOUND, or EXIT, recording continues, but control returns
to the PLAYER side, even if you previously clicked
RECORDER.
• Some tape decks require that you press the
r REC and (
buttons simultaneously to start recording. To perform
one-button recording from the on-screen display, be sure
to record the recording signal as shown in steps 1 to 7 of
“Registering IR codes” (pages 19 to 21).
• Sound input through the 5.1 INPUT jacks cannot be
recorded on a recording component (STR-DE815G only).
• When you record on a DAT or MD connected to the DAT/
MD REC OUT jacks, sound adjustments do not affect the
recording.
USER
SUB
INPUT
(
)
0
p
P
=
+
USER
SUB
INPUT
(
)
0
p
P
=
+
5
4
3
2
1
6
7
8
9
DISC
REC EDIT
10/0
EXIT
>10
ENTER
TRACK
D. SKIP
TAPE
EXIT
DAT/MD
VIDEO 2
VIDEO 1
CD
RECORDER
PLAYER
EXIT
TAPE
CD
RECORDER
PLAYER
(
)
0
p
P
(
)
9
p
P
0
A B
REC
/
FUNCTION
SOUND
SETUP
EXIT
TAPE
CD
RECORDER
PLAYER
(
)
0
p
P
(
)
9
p
P
0
A B
REC
/
FUNCTION
SOUND
SETUP
(continued)
arrow