Sony RDR-HXD1065 - Manual (Page 151)

151
Se
tti
n
gs an
d Adj
u
st
m
e
n
ts
Easy Setup
(Resetting the Recorder)
Select this to run the “Easy Setup”
programme.
You can switch between Digital and
Analogue Mode using “Easy Setup.”
1
Press SYSTEM MENU while the
recorder is in stop mode.
2
Select “SETUP,” and press ENTER.
3
Select “Easy Setup,” and press
ENTER.
Example: Digital Mode
4
Select “Start.”
5
Follow the instructions for “Easy
Setup” (page 27) from step 2.
z Hint
You can check which Mode (Digital or Analogue)
you are in using SETUP display. The Mode is
displayed on the top of the display.
b Notes
• Check that the aerial cable is connected to the
appropriate AERIAL IN jack before switching
the Mode. If you switch to Digital Mode, connect
the aerial cable to DIGITAL AERIAL IN. If you
switch to Analogue Mode, connect the aerial
cable to ANALOG AERIAL IN.
• When you switch between Digital and Analogue
Mode, timer settings for the former mode are
deleted.