Sony RDR-HXD1065 - Manual (Page 88)

88
z Hint
You can also extend the recording time while
recording by pressing OPTIONS and selecting
“Extend Rec..”
b Note
The new settings become effective when you exit
the GUIDE Plus+ system.
About the PDC/VPS function
PDC/VPS signals are transmitted with TV
programmes in some broadcast systems.
These signals ensure that timer recordings are
made regardless of any broadcast delays,
early starts, or broadcast interruptions.
To use the PDC/VPS function
Select “VPS / PDC” in step 7 above.
When you turn on this function, the recorder
starts scanning the channels before the timer
recording starts. If you are watching TV
when scanning starts, a message will appear
on the TV screen. If you want to watch TV,
switch to your TV’s tuner or turn off the
PDC/VPS channel scan function.
Note that if you turn off the PDC/VPS
channel scan function, the timer recording
will not start.
To temporarily turn off PDC/VPS channel
scan
Press OPTIONS and select “PDC/VPS Scan
Off.”
To ensure that the PDC/VPS function works
properly, turn off the recorder before the
timer recording starts. This will
automatically turn on the PDC/VPS channel
scan function while the recorder remains off.
1
With the GUIDE Plus+ system turned
off, press [TIMER].
The SCHEDULE list appears.
2
Select the timer setting you want to
cancel using M/m.
3
Press the red button (“Delete”).
To close the SCHEDULE list
Press GUIDE or [TIMER].
When the timer settings overlap
The programme that starts first has priority
and the second programme starts recording
only after the first programme has finished.
When the recordings start at the same
time
The programme that is set last has priority. In
this example, timer setting B is set after A, so
the first part of timer setting A will not be
recorded.
When the end time of one recording and
the start time of another are the same
After finishing the previous recording, the
other recording may be delayed.
b Note
When “PDC/VPS” is set to “On” for one or more
timer recordings, the start times may change in the
event of a broadcast delay or early start.
Cancelling timer settings
will be cut off