Sony RDR-HXD1065 - Manual (Page 84)

84
2
Press the green button (“Manual”).
3
Set the date using the number buttons
and </M/m/,. Then press the
green button (“Next”).
4
Set the start time using the number
buttons and </M/m/,. Then press
the green button (“Next”).
5
Set the stop time using the number
buttons and </M/m/,. Then press
the green button (“Next”).
6
Select the input source using M/m,
and select the programme position
using the number buttons or M/m.
You can also select the programme
position using the yellow button
(“Channels”).
7
Press the green button (“Next”).
The display for entering characters
appears.
To change the title name, select a
character on the keyboard using
</M/
m/,, and press ENTER.
To switch between upper-case, lower-
case, or characters with accents, press the
yellow button (“Keyboard”).
8
Press the green button (“Save”).
The date, start and stop times,
programme position, etc. setting appear.
The recorder is ready to start recording.
To confirm, change, or cancel a timer
recording
See “Checking/Changing/Cancelling Timer
Settings” on page 87.
To stop recording during timer recording
Press x REC STOP.
Note that it may take a few seconds for the
recorder to stop recording.
Rec. Mode Adjust
If there is not enough available disc space for
the recording, the recorder automatically
adjusts the recording mode to enable the
entire programme to be recorded. Set “Rec.
Mode Adjust” in the “Recording” setup to
“On” (page 146).
Auto Title Erase (HDD only)
If there is not enough space for a timer
recording, the recorder automatically erases
old titles recorded on the HDD.
Set “Auto Title Erase” in the “Recording”
setup to “On” (page 146). The oldest played
title is erased. Protected titles are not erased.
If the timer settings overlap
If one or more timer settings overlap, a
message appears. To change the timer
settings, see “Checking/Changing/
Cancelling Timer Settings” on page 87.
One Touch Timer
If you use the SMARTLINK connection, you
can easily display the GUIDE Plus+ system
“Schedule”.
When the TV is turned on or in standby
mode, press [TIMER]. The recorder
automatically turns on and the TV’s input is
switched to the recorder. The SCHEDULE
list appears.