Sony RDR-HXD1065 - Manual (Page 81)

81
T
ime
r R
e
co
rd
in
g
(
F
o
r s
a
te
ll
ite
, c
a
b
le
, t
e
rr
e
st
ria
l
u
se
rs
o
n
ly
)
Timer Recording (GUIDE
Plus+/VIDEO Plus+/
Manual)
There are three methods to set the timer
within the GUIDE Plus+ system: One Button
Recording, VIDEO Plus+, and setting the
timer manually.
b Notes
• When the recorder is connected to a set top box
receiver and you want to record using the GUIDE
Plus+ system, turn on the set top box receiver and
connect the set top box controller.
• Do not operate your set top box receiver just
before or during a timer recording. This may
prevent the accurate recording of a programme.
You can use the GUIDE Plus+ system to set
the timer to record a programme up to seven
days in advance.
1
Press GUIDE .
2
Select a programme using </M/m/
,.
To search for a programme by category
or by keyword, select “Search” in the
Menu Bar. See “Searching for a
Programme Using the GUIDE Plus+
System” on page 73 for more
information about searching for a
programme.
You can select a programme from “My
TV.”
3
Press the red button (“Record”).
The set programme and Time Slot
change colour and the recorder is ready
to start recording. When recording from a
set top box receiver, be sure to turn it on.
Unlike a VCR, there is no need to turn off
the recorder before the timer recording
starts.
• To record on a DVD
See “Checking/Changing/Cancelling
Timer Settings” on page 87.
• To make more detailed timer settings
See “Checking/Changing/Cancelling
Timer Settings” on page 87.
To confirm, change, or cancel a timer
recording
See “Checking/Changing/Cancelling Timer
Settings” on page 87.
To stop recording during timer recording
Press x REC STOP.
Note that it may take a few seconds for the
recorder to stop recording, and that the
recording cannot be stopped within the first
minute of recording.
One Button Recording (GUIDE
Plus+)
+ RW -RW VR -RW
Video
-R VR
+ R HDD
-R
Video
</M/m/,
x REC
STOP
Colour
buttons
GUIDE
[TIMER]
,continued