Sony RDR-HXD1065 - Manual (Page 154)

154
The picture does not fill the screen, even
though the picture size is set in “TV Type”
of the “Video Output” in the “Video”
setup.
, The picture size of the title is fixed.
The picture is black and white.
, Check that “Line1 Output” of the “Scart
Setting” in the “Video” setup is set to the
appropriate item that conforms to your
system (page 142).
, If you are using a SCART cord, be sure to
use one that is fully wired (21 pins).
GUIDE Plus+ system does not appear.
, 1Even if you complete “Easy Setup,” TV
programme listings do not appear until the
recorder receives the GUIDE Plus+ data.
2
Turn off the recorder, but do not unplug
it. 3Wait for 24 hours. It may take several
days for the recorder to receive the GUIDE
Plus+ data for all programme positions. If
the recorder does not receive the GUIDE
Plus+ data after 24 hours, set the host
channel manually (page 77).
, The postal code is incorrect. Correctly set
your postal code (page 75).
, When the recorder is connected to a set top
box receiver, the set top box receiver must
be turned on to download the GUIDE Plus+
data.
, Area numbers that cannot be received using
GUIDE Plus+ are set. Select “Easy Setup”
from “SETUP” in the System Menu, and
follow the on-screen instructions to make
the settings again (page 27).
, The “Time Lock” function on your cable
box is activated. Set this function to off.
, If the host channel has changed or moved,
the programme guide data cannot be
received. In this case, follow the steps in
“Searching for the GUIDE Plus+ host
channel” (page 76) to update the host
channel setting. If the problem still persists
after waiting for a day, search for the host
channel at the following website and set the
host channel manually (page 77).
www.europe.guideplus.com
The programme position number in the
programme listing does not match the
broadcast station.
, There may be more than one channel lineup
for your area. To change the channel lineup,
select “Editor” in the Menu Bar of the
GUIDE Plus+ system (page 77).
Programme listings for some programme
positions are missing.
, The programme guide data may not be
updated. Turn off the recorder and let the
recorder receive the programme guide data.
, Some broadcast stations support only two
days of data. For details, see the following
website:
www.europe.guideplus.com
, All of the GUIDE Plus+ data could not be
received because the reception is poor.
The programme listing is not up to date.
, The recorder was in use during the time that
the GUIDE Plus+ data was scheduled to be
downloaded.
, All of the GUIDE Plus+ data could not be
received because the reception is poor.
There is no sound.
, Re-connect all connections securely.
, The connecting cord is damaged.
, The input source setting on the amplifier or
the connection to the amplifier is incorrect.
, The recorder is in reverse play, fast-
forward, slow motion, or the pause mode.
, If the audio signal does not come through
the DIGITAL OUT (COAXIAL or
OPTICAL)/HDMI OUT jacks, check the
“Audio Connection” settings in the
“Audio” setup (page 143).
, The recorder supports only MP3 audio and
MPEG audio for DivX video files. Press
AUDIO and select MP3 audio or MPEG
audio.
GUIDE Plus+ system
Sound