Sterling STT 1600 - Manual (Page 19)

3.2. Switching on the dryer
Switch on the system by means of the main switch.
& The control system carries through a self-test; after that, the name of the
dryer and the operation status of the unit are displayed.
F Unblock the control system:
Keep the ACK key pressed until the LEDs of the keys K1 - K4 light up.
3.2.1. Operation statuses
The following operation statuses can be displayed:
• system is off
• system is on
• blower runs on
• valve block
• regeneration will be finished in x min.
0
3
6-
2
M
S
STT 1600
Start-up 3-4