Sterling STT 1600 - Manual (Page 84)

3
OP7, OP17
09/96
3.3.2 Entering Alphanumeric Values
With the input of alphanumeric values, digits and letters are mixed.
For the numerical components of the input, proceed as described in section
3.3.1. If, however, you wish to enter a letter at the current cursor position,
you must enable the corresponding alphanumeric font. In this instance, you
move the cursor with activated Shift Lock mode with
and .
A to F characters can be entered directly with activated Shift Lock mode
using numeric keys 1 to 6. If you want to enter digits again after the letters,
Shift Lock mode must be de-activated. To enter the alphanumeric string
7FEB53
, for example, proceed as follows:
Step Procedure
1 Press
7
2 Press
Shift-LED is on.
\
3 Press in succession
F
6
E
5
B
2
4 Press
Shift-LED goes out.
\
5 Press in succession
E
5
C
3
6 Confirm by pressing
\b
Mixed input of
digits and letters
Entering A to F
characters
General Operation
B
G
1
0/
2
0