Sony ZS-M30 - Manual (Page 13)

13 GB
The CD Player
•
The MD Player
Tip
The disc name is displayed only with the MDs that
have been electronically labelled. If the MDs have
not been labelled, the track name will not be
displayed.
During play (MD)
The current track number and the track name
are displayed first, then the current track
number and the playing time are displayed.
To check the remaining time,
recording date and time, etc.
Press DISPLAY.
To display Press DISPLAY
the current track number once
and the track name
the current track number and twice
remaining time on the current
track
the number of tracks left three times
and the disc name
the number of tracks left four times
and remaining time on
the MD
recording date and time* five times
the current track number six times
and playing time
(normal indication)
* Once the clock is set, the recording date and
time are stamped automatically (page 35).
Tip
The track name is displayed only with the MDs
that have been electronically labelled. If the MDs
have not been labelled, the track name will not be
displayed.
Note
During repeat play (page 14), shuffle play (page
15) and programme play (page 15), the number of
tracks left and remaining time on the MD will not
be displayed.
Locating a specific
track
You can quickly locate any track on a CD or
an MD using the number/character buttons
on the remote. You can also find a specific
point in a track while playing a CD or an
MD.
Number/
character
buttons
. , >
To locate
a specific track
directly
a point while
listening to the
sound
a point while
observing the
display
Press
the number/character button of
the track.
> (forward) or .
(backward) while playing and
hold down until you find the
point.
(On the player, use M or m.)
> (forward) or .
(backward) in pause and hold
down until you find the point.
(On the player, use M or m.)
continued